Simpson
10. The Box System: DIY Custom Closet Organizer Magic!
Hey, DIY enthusiasts!
Have you ever felt overwhelmed by ongoing renovation chaos? Trust me, I’ve been there! But let me divert your attention to one of my favorite projects: a DIY closet organizer that’s as stylish as it is utilitarian. Amid one master bedroom transformation amidst the dazzle of chic wallpapers and lights, this closet organizer truly sparked joy.
The brilliance of this project?
It’s grounded in simplicity: boxes.
Yep, just uniformly sized boxes, making it the most straightforward custom design you’ll ever try. We must give a nod to Brady for this masterstroke. Together with his team, they sketched the entire layout, basing the measurements on their closet. Each box measured 19.5 inches long x 9.75 inches wide x 15 inches deep for this design. These dimensions allowed three boxes to span the top of our closet, end to end.
What I adore about this box system is its flexibility.
You can rearrange these boxes to cater to any closet size and your personal storage needs. Stack them, flip them on their side, or even throw them on an added shelf for good measure.
With your blueprint ready, your next stop was Home Depot and ensure your cart filled with the following essentials:
- 3/4 birch plywood boards
- Wood stain and veneer edge tape
- Screws, wood glue, and dowels
- Closet rod brackets
Building process:
Start with the wood pieces for each box, consisting of two long sides, two shorter ends, and two back pieces. After the cutting, the fun part began: gluing, clamping, and screwing them together. A bit of sanding ensured each edge was seamless. For that final touch of elegance, attach veneer edge tape.
With your assembly line in full swing, all 17 boxes take over the finishing touches, filling in screw holes and giving each box a rich stain.
Your boxes will go up after marking the wall studs for solid support. The final step? The closet rods. With some boxes turned sideways and others customized for added storage, the final look was a DIY dream.
9. Two Epic DIY Bed Ideas to Maximize Your Small Bedroom Space!
1. DIY Bed with Built-in Shelves
Hey There Home Guide: [Link]Â
In a snug room? This platform bed with shelves isn’t just for kids—it’s a game-changer for adult spaces, too! Measure wall-to-wall, and let’s kick things off. Assemble those IKEA Nordli drawers and set them atop 2×2 furring strip risers attached to the baseboard. Secure side panels with a neat gap and crown them with a trim. Nail a brace of 2x4s to your back wall, then pop a melamine board on top—that’s your bed platform. Build shelf units for the head and foot, adding chic molding. Finish with wood filler and a splash of paint for that pristine look!
2. Teen Platform Bed with Side Storage
Ana White’s Design: [Link]
Seeking sleek storage for a teen’s space? Here’s a fab bed with side storage that’s a breeze to build. Design your bed and shelves, keeping your measurements tailored. Construct your frame using 1x2s—yep, no hefty plywood! Once your frame and side shelf are done, merge them, ensuring the shelves face outwards. Elevate with legs and sand and coat with white paint for the finishing touch.
8. Hanosa’s DIY Platform Bed: A Step-by-Step Guide
Are you on the hunt for a unique platform bed combined with desk space? Look no further! Dive into Hanosa’s DIY platform bed, inspired by a past summer project that was a hit on Instagram. If store-bought options are letting you down, it’s time to roll up those sleeves and get DIY-ing.
Here’s the full breakdown:
1. Start with the Base: Fix those sturdy feet under the boxes. This will elevate your bed and provide that chic platform look.
2. Synchronize the Furniture: Seamlessly connect each piece. This ensures stability – after all, we want cozy, not wobbly!
3. Fashion Your Cupboard Doors: Grab your 200 x 50 cm boards and cut out doors to keep those feet out of sight. Pro-tip: Maintain a slight gap between the door and the floor. This gives room to install hinges without any hitches.
4. Support the Back: Slice that third 50 x 200 cm board to match the height of your boxes (including those feet). Mount it vertically to the bed’s rear. It doesn’t have to span the entire length – customization is key!
5. Top it Off: Place your spacious 250 x 110 cm tray on top. This becomes the platform for your mattress, promising sweet dreams.
6. Reinforce: Grab those brackets and secure the structure. Attach them along the bed adjacent to the vertical board and behind the boxes. Strength is beauty!
7. Seal the Deal: Utilize the leftover 200 x 50 cm board piece to close off one side of the bed.
8. Accessorize: Pop on some trendy handles. It’s not just about function; it’s about flair!
9. Desk Time: Pair your bed with a sleek desk supported by a stylish hairpin leg as a cherry on top. A perfect blend of sleep and study!
This DIY platform bed isn’t just a piece of furniture; it’s a statement. Time to let your room speak volumes about your style!
7. Hacking your Clutter with IKEA BOAXEL Closet System
Dive into your closet transformation with the IKEA BOAXEL system! Visited IKEA and selected the BOAXEL? You’re on track for an organized space. Here’s your step-by-step guide:
1. Preparation: Clear out your space and consider a fresh coat of paint. The SW Alabaster white is a warm choice that complements BOAXEL rails, ensuring a cohesive look.
2. Read the Manual: Before diving in, familiarize yourself with the BOAXEL instructions. You’ll discover you need specific screws. Grab 12 #7 screws and 32 #8 screws, and don’t forget the essential drywall anchors – a trip to Home Depot might be in order.
3. Installation Tools: Equip yourself with:
- Level (preferably magnetic)
- Pencil
- Tape measurer
- Screwdriver
- Fanny pack or tool belt (to keep screws at hand)
4. Placement Strategy: Sketch out measurements to determine spacing. Allow for about 2 1/2 inches on each side of your system. Plan to suspend the main rail roughly eight inches from the ceiling. Think about:
- Aesthetics: Centered or shifted?
- Purpose: Kid’s closet, pantry, or master closet?
- Functionality: Decide between rods, shelves, baskets, or drawers.
- Storage: Ensure enough clearance for your choice of storage boxes.
5. Design Tips: Go dresser-free, maximizing floor space in the bedroom. Also, keep items off the floor for a tidy feel. Use vertical space efficiently with BOAXEL.
6. Costing: The BOAXEL system comes in at around $235. This includes the cost of screws and drywall anchors. It’s a smart investment when compared to pricier dressers.
7. Flexibility: Love adaptability? BOAXEL shines here! You can easily modify configurations. Shift brackets or rearrange components to suit your evolving needs.
8. Research & Play: Before starting, explore the BOAXEL planner on the IKEA website. This will give you design ideas and guidance.
9. Time Commitment: Set aside approximately eight hours from start to finish, inclusive of painting. While it requires effort, the results will be worth it!
10. Final Thought: Harness the power and versatility of the BOAXEL system. Once you’ve set it up, you’ll marvel at the transformation and efficiency it brings to your space. Dive in and make that closet shine!
